Casper Electronics

Drone Lab HOME

thanks to BSOM for the time lapse assembly video!
Step by step instructions:

FORUM

Ask questions and find answers at the Drone Lab builders forum

DOWNLOAD

We have released two versions of the Drone Lab PCB. Look at your PCB to see which version you have.

---

V2.0 (the document is titled “version 1″ but it complies with PCB V2.0)
-Power point document
-PDF file

---

V2.1
-Power point document
-PDF file

---

Housing Assembly

The screw should thread into the nut pushed into the foot. If it doesn’t, try tightening the nut between the circuit board and the back plate so that the screw pushes out further through the back plate. Also try squeezing the face of the foot as you turn it onto the screw. This will push the nut in further and hold it in place so you thread it onto the screw.