Finished Pieces

Megaphone Bending

    For details on the wet/dry volume mod shown above, look here.


    Sorry, no sound files for this piece.

    3 Responses to “Megaphone Bending”

    • 1

      * Casper Electronics » Archive » Updates said:
      March 9th, 2009 at 5:16pm #

      […] to the finished pieces page and a bunch of schematics. There’s a new megaphones page with schematics. New mega Barbie bending schematic. Some Casio SK1 operation theory brought to you by Oceanus. A […]

    • 2

      david simons said:
      January 3rd, 2010 at 6:24pm #

      Hi.Am i right in thinking that you have used modular sk1’s etc with actual modular systems?Are the connections compatible or is it likely to fry somrthing?Thanks.Dave.

    • 3

      casper said:
      February 18th, 2010 at 1:24am #

      @DavidSimons: The signals aren’t especially compatible. I usually use 1 or 2 degrees of separation between my gear. I have a few types of translator circuits that allow my gear to talk. Nothing high tech. In some cases I just use a transistor. A pulse from my modular synth applied to the “gate” leg of a transistor will allow current to flow across the “collector” and “emitter” legs. Relays can be really useful too. Like in my relay step sequencer

      I also use an envelope follower module which translates incoming audio signals into modular standard voltages.

    Leave a Reply

    If you're not already logged in, there might be a question you need to answer before you post to prove you're human. It's there to help stop comment spam.